Dazzle

A tiny OS with a big picture

Dazzle is an ultra-light operating system for Raspberry Pi computers. It is made to run well on the smallest, lowest-powered Pi: the Raspberry Pi Zero.

Download Dazzle How to install

Light, simple, yours

Dazzle gives even a Pi Zero a smooth graphical desktop, with a small store of apps you can install from Settings.

Made for the Pi Zero

Runs on Raspberry Pi 1–5 and the Zero, Zero W and Zero 2 W. An SD card of 256 MB is enough.

An app store

Install apps from Settings → Software: files, camera, games, a terminal and more.

Built-in networking

Join Wi-Fi, use Ethernet, or turn the Pi into an access point and share its connection.

Open source

Written in Zig on top of Linux and the Raspberry Pi kernel. See the code.

Install Dazzle

It takes a few minutes: write the image to a microSD card, put it in your Pi and switch on.

You will need

  • A Raspberry Pi (1–5, or Zero / Zero W / Zero 2 W)
  • A microSD card, 256 MB or larger (everything on it will be erased)
  • An HDMI display (with a mini- or micro-HDMI adapter if your board needs one)
  • A USB keyboard and mouse, or a USB touchscreen (on the Zero, a micro-USB OTG adapter and hub)
  • Optional: a USB Ethernet adapter, or a Raspberry Pi Camera Module v1 or v2
  1. Download Dazzle

    dazzle.img.xz. There is no need to unpack it.

  2. Open Raspberry Pi Imager

    Get it from raspberrypi.com/software, then choose your device.

  3. Choose the image

    Under Choose OS, scroll to the bottom and pick Use Custom, then select the dazzle.img.xz you downloaded.

  4. Choose your microSD card

    Under Choose Storage, pick your card.

  5. Write it

    Click Next. When asked about OS customisation, choose No: Dazzle asks for its own settings when it starts.

  6. Boot

    Put the card in your Pi, connect the display and keyboard and mouse, and power it on.

Apps

Everything in the Dazzle store. On Dazzle, open Settings → Software to install any of these.

Loading apps…

Common tasks

Short guides for things people do with Dazzle.

Set up Dazzle as a Wi-Fi access point

Turn your Pi into a hotspot so phones and laptops can join it, and optionally share an Ethernet connection with them. Chat and Motu work between everyone on the same network, no internet needed.

  1. Open Settings → Wi-Fi

    Your Pi needs a Wi-Fi adapter (built in on the Zero W, Zero 2 W, 3, 4 and 5).

  2. Set the mode to Access Point

    Press the Mode button and choose Access Point.

  3. Give it a name and password

    Enter a Name of 1–32 characters and a Password of 8–63 characters.

  4. Choose an upstream (optional)

    To share the internet, plug in an Ethernet cable and pick it as the Upstream. Leave it as None for a private network.

  5. Press Start

    The status shows Active and the Clients list fills as devices join. The hotspot's address is 192.168.4.1.